Coleman 2000004413 manual Extend the Shelter Frame, Adjust the Height, Set up the Shelter

SHELTER SETUP INSTRUCTIONS

MODEL 2000004413

Before you begin

Read all instructions before set up.

•Select a level site clear of rocks, branches, and other hard or sharp objects, to install your shelter.

WARNING: Keep clear of overhead power lines.

• Do not set up your shelter under trees because of potential

lightning strikes or falling tree limbs in inclement weather.

• Secure with all stakes and guylines provided to prevent property

damage or personal injury.

•Pull up sliding bracket located on upper portion of leg until push button snaps into place. (Fig. 3) This will ensure upper portion of frame is fully extended.

Push

Button

Fig. 3

LINE

• For best results in windy conditions, position narrow end of

shelter into the wind.

• Do not drop shelter.

• Do not bounce shelter bag on its end to remove shelter, as these

actions may damage the frame.

• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO

PEOPLE TO ASSEMBLE.

• Under no circumstances should this product be used to cover

automobiles, marine products or similar items.

CAUTION: Avoid pinch points when opening and closing the shelter frame.

Replacement Parts List

Description	Part Number
Shelter Top	5010000766

1	Extend the Shelter Frame
	• With two persons standing at diagonal corners of the structure,

HANDY TIP: To fully engage the push button, grip the top and bottom frame members and squeeze as shown in Fig. 3A. Be careful to avoid pinch points.

Fig. 3A

• Secure shelter top to frame with nylon fasteners provided. (Fig. 4 & 5)

Fig. 4 Fig. 5

3Adjust the Height

•Adjust desired height until push button locks into place, making sure all four posts are level. (Fig. 6 & 7)

STITCH

grab the leg, and pull out to unfold frame. (Fig. 1)

NOTE: Do not unfold frame completely. This will allow easier fit

for draping shelter top over frame.

Push Button

Fig. 6

Upper

Portion

of Leg

Push
Button	Fig. 7

Fig. 1

2Set up the Shelter

•Drape shelter top over frame. (Fig. 2)

•Attach nylon fasteners, located on corners of shelter top, to six corners of frame post. (Fig. 2A)

2A

Fig. 2

4Install the Screen

•Unroll screen house and wrap around outside frame posts and under the shelter top. Locate zippers per illustrations. (Fig. 8)

•Attach top of screen to frame with hooks and loops provided. (Fig. 9 & 10)

NOTE: Shelter should be set at the highest position when used with screen house.

	Fig. 9
Fig. 8
Zippers	Fig. 10
	(continued on other side)