TENT SETUP INSTRUCTIONS
MODEL 2000005512
Before you begin
Read all instructions before set up.
•Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
•Do not set up your tent under trees because of potential lightning strikes or falling tree limbs in inclement weather.
•Secure with all stakes and guylines provided to prevent property damage or personal injury.
•For best results in windy conditions, position narrow end of tent into the wind.
•Do not drop tent.
•Do not bounce tent bag on its end to remove tent, as these actions may damage the frame.
•THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO PEOPLE TO ASSEMBLE.
•Under no circumstances should this product be used to cover automobiles, marine products or similar items.
CAUTION: Avoid pinch points when opening and closing the tent frame.
1Extend the Tent Frame
•Stand the tent upright with the hub assembly at the top. (Fig. 1)
•Unfold the arms of the tent downward until they lay flat on the ground. (Fig. 2)
Fig. 6
Fig. 5 |
STITCH LINE
Fig. 1
Fig. 2 |
3Verify Connections between Tent and Frame Poles
•Verify the clips along the edges of the tent are properly attached to the frame poles. (Fig. 7 and Fig. 8)
2Raise the Tent
•Unfold the arm joints located at each of the tent corners. The tent will raise as the leg poles are extended. (Fig. 3 and 4)
•Extend each of the telescoping leg poles until they snap into place. (Fig. 5 and 6)
Fig. 4
Fig. 3 |
Fig. 7 |
Pole |
Clip |
Fig. 8
(continued on other side)
