Coleman 2000008054 manual Tent Setup Instructions, Verify Connections, Between Tent, Frame Poles

TENT SETUP INSTRUCTIONS

MODEL 2000008054

Before you begin
• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of tent
into the wind.
• Do not drop tent.	Fig. 6
• Do not bounce tent bag on its end to remove tent, as these
actions may damage the frame.
• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
• Under no circumstances should this product be used to cover
automobiles, marine products or similar items.

CAUTION: Avoid pinch points when opening and closing the

tent frame.
1	Extend the Tent Frame
	• top.Stand(Fig.the1)tent upright with the hub assembly at the
	• Unfold the arms of the tent downward until they lay flat on
	the ground. (Fig. 2)	3	Fig. 5
			Verify Connections
STITCH LINE			between Tent and
			Frame Poles
			• Verify the clips along the edges of the tent are properly
			attached to the frame poles. (Fig. 7 and Fig. 8)
2	Fig. 1	Fig. 2
	Raise the Tent
	• Unfold the arm joints located at each of the tent corners.
	The tent will raise as the leg poles are extended.
	(Fig. 3 and 4)
	• Extend each of the telescoping leg poles until they snap
	into place. (Fig. 5 and 6)

Fig. 7

Clip

Fig. 4

Pole

Fig. 3

Fig. 8

(continued on other side)