Coleman 2000008494 manual Layout & Positioning Tent and Poles, Connect Poles to Tent

TENT SETUP INSTRUCTIONS

STITCH LINE

Before you begin

•Read all instructions before set up.

•Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

•Do not set up your tent under trees because of potential lightning strikes or falling tree limbs in inclement weather.

•Secure with all stakes and guylines provided to prevent property damage or personal injury.

•For best results in windy conditions, position narrow end of tent into the wind.

•Enlist the help of at least one other person to assist you when it is time to assemble the tent.

Pole Descriptions

No.	Description	Qty.	Pole	Pole
			Repair Kit	Replacement Kit
1	Front & Rear Pole, back, longest	2	5010000539	5010000549
2	Side Pole, grey	2	5010000540	5010000548
3	Main Body Pole, black with red mark, long 2		5010000569	5010000568
4	Awning Pole, black, short	1	5010000543	5010000545

1 Layout & Positioning

of Tent and Poles

•Layout and position the tent with door facing desired direction. (Fig. 1)

•Stake down tent corners first through the stake rings. (Fig. 2)

•Keep the floor taut.

•Stake down the remainder of the stake rings.

•Assemble all poles by unfolding and interlocking the shock- corded pole sections.

•Insert the body poles into the pole sleeves.

	1			2
				3
2			Pole	1
		Fig. 1
			Sleeve
		Tent
		Stake

Stake Ring

Fig. 2

MODEL 2000008494

2 Connect Poles to Tent

•Insert one pin into one end of the pole. (Fig. 3 and 4)

•Go to opposite end of pole and carefully insert the pin into the other pole end. (Fig. 4)

•Repeat for all poles.

Plastic Caps

	Fig. 3
Pole	Pole	Clip
Pin

Fig. 4 Fig. 5

3 Attach Tent to Body Poles Using Clips

•Attach clips along the edges of tent to body poles. (Fig. 5)

•Make any adjustments to the tent stakes, if needed.

4 Attach Rainfly

•Insert awning pole into pole sleeve located on underside of rainfly. (Fig. 6)

•Drape rainfly over tent. (Fig. 7)

•Connect the elastic loops with “S” hooks, (found at the rainfly corners) to the rings found at the tent corners. (Fig. 8)

•Insert the awning pole into the plastic caps. (Fig. 9)

•Secure rainfly with straps located on the underside of rainfly. (Fig. 10)

•Attach and stake out guylines. (Fig. 7)

HINT: During setup, keep door zipped to keep proper tension on fabric.

(continued on other side)