4 Stake the Tent

• Secure tent by driving stakes through the webbing loops sewn to the tent base. (Fig. 9)

• Keep the floor taut.

5 Secure the Guylines

• Attach and stake out guylines. (Fig. 10)

• Adjust sliders to make guylines tight.

Tent Stake

Webbing Loop

Guyline Stake

Fig. 9

Fig. 10

6 Disassembly

To take down the tent, follow the previous steps and illustrations in the reverse order:

Remove guylines and stakes. (Fig. 10 and 9)

Lower the frame one leg pole at a time by pushing the lock buttons and collapsing the telescoping leg poles. (Fig. 6)

Fold the arm joints located at each of the tent corners. (Fig. 4)

Collapse the tent by folding the arms upward until the tent stands upright with the hub assembly at the top. (Fig. 2 and 1)

Place the tent in the carry bag for storage.

TIP: After collapsing the tent, place it on its side, then roll it multiple times with pressure to reduce its size. This will allow the unit to slip into the carry bag.

7 To Store

1. All stakes must be placed in the storage bag to prevent damage to the fabric items placed in the carry case.

2. Make sure all components are clean and dry before placing in carry case.

3. Store in a clean, dry area.

STITCH LINE

Things You Should Know:

Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside of your shelter. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside the shelter. It is NOT LEAKAGE through the shelter fabric.

Tree limbs, tree sap, bird droppings, or moisture steadily dripping off tree limbs can cause damage to the shelter fabric and its coating resulting in leaks or loss of flame-resistant properties.

Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes inside your tent. Use a separate storage bag.

Stakes should be removed by pulling on the stake itself. NEVER PULL ON THE TENT TO REMOVE STAKES AS THIS COULD RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY.

Do not leave your tent set-up for weeks at a time. Be aware that exposure to ultraviolet rays from the sun can seriously damage material and/or cause it to become discolored.

This product is not intended to be used during heavy rain, wind, hail, snow or other inclement weather. Excess water build-up can cause the frame system to become unstable, and possibly collapse, causing injury.

The tent should be taken down and placed in storage during windy conditions to avoid damage to product or personal injury.

DO NOT use gas or flame sources under or near this product.

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM

THIS TENT FABRIC.

This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

The Coleman Company, Inc. • 3600 North Hydraulic • Wichita, Kansas 67219 U.S.A.

1-800-835-3278 • www.coleman.com

MADE IN BANGLADESH

© 2011 The Coleman Company, Inc. All rights reserved.

Coleman®, , and are registered trademarks of

The Coleman Company, Inc.

4010015386 (ECN20019426-01)

Page 2
Image 2
Coleman 2000010387 manual Stake the Tent, Secure the Guylines, Disassembly, To Store, Things You Should Know

2000010387 specifications

The Coleman 2000010387 is a high-quality portable camping stove designed to bring convenience and efficiency to outdoor cooking. Ideal for camping enthusiasts and outdoor adventurers, this stove combines practical features with innovative technologies to enhance the user experience.

One of the standout characteristics of the Coleman 2000010387 is its size and portability. Weighing in at just a few pounds, this stove is compact enough to fit into most car trunks, making it an excellent choice for camping trips, tailgating, or beach outings. Its lightweight design allows for easy transportation, so users can enjoy outdoor cooking without the hassle of heavy equipment.

The stove features a powerful cooking performance, utilizing a single burner that can deliver up to 7,500 BTUs of heat. This level of output makes it suitable for boiling water, cooking meals, and even frying, providing versatility for various culinary needs. The temperature adjustment control allows users to set the flame to their desired level, ensuring precise cooking times and results.

Coleman's WindBlock Technology is another key feature of this camping stove. This innovative design element helps shield the flame from wind, maintaining an efficient and consistent cooking temperature, which is particularly beneficial when cooking outdoors in less-than-ideal weather conditions. With this technology, users can enjoy uninterrupted cooking, whether they’re in a breezy campsite or a windy picnic spot.

Durability is also a hallmark of the Coleman 2000010387. Constructed with rugged materials, the stove can withstand the rigors of outdoor use. The integrated burner is designed to be resilient, ensuring long-lasting performance with minimal maintenance.

The Coleman 2000010387 is fueled by propane, providing a convenient and accessible energy source for outdoor cooking. The propane cylinder is easy to attach and detach, making setup and breakdown quick and hassle-free.

In conclusion, the Coleman 2000010387 combines portability, powerful cooking performance, and technological innovations to create a reliable camping stove. Whether you're a seasoned camper or a weekend warrior, this stove is an excellent addition to your outdoor gear, allowing you to prepare delicious meals with ease no matter where your adventures take you.