To Light continued
NOTE: If lantern does not light, |
|
|
1/8" |
| |
repeat above step. If the lan- |
| |
tern does not light after several | (3 mm) | |
|
| |
attempts, check for a spark while |
|
|
clicking the valve. If no spark is |
|
|
present, check the electrode gap. |
|
|
The gap should be about 1/8" |
|
|
(3 mm). Bend flat electrode to set |
|
|
gap. If the lantern is wet due to rain, |
|
|
high humidity, etc., the valve may |
|
|
not spark. Use lighting procedure |
|
|
for match light version lanterns. |
|
|
■■Brightness may be adjusted |
|
|
with fuel valve. |
|
|
■■The lantern may be carried by |
|
|
|
| |
|
| |
the handle. |
|
|
|
|
|
To Turn Off
■■Turn fuel valve off.
8
To Store
■■Make sure lantern is cool.
■■Move lantern away from flame (including pilot lights) and other ignition sources.
■■Remove propane cylinder from lantern.
■■Replace protective cap on propane cylinder.
■■Lantern can be placed in base for secure storage.
DANGER
•EXPLOSION - FIRE HAZARD
•Never store propane near high heat, open flames, pilot lights, direct sunlight, other ignition sources or where temperatures exceed 120 °F (49 °C).
•The cylinder must be disconnected when the lantern is in storage.
