Coleman 5059-720 instruction manual Model, Fireplace Parts Check List, Assembly cont

®

Assembly and Instruction Manual for Copper Fireplace

Model 5059-720

Follow these instructions for assembly and read carefully, particularly the safety statements. The safety alert symbol, is a universally recognized symbol used to identify safety information about hazards that can result in personal injury. When this symbol is used you should pay very close atten- tion to what is written. Review these instructions before beginning assembly or using your fireplace.

FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE,

SERIOUS INJURY OR DEATH.

WARNING

•Outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life.

•Keep away from all combustible materials including gasoline and other flammable liquids and vapors.

•Use on a level, noncombustible surface only. Keep away from house, garage, balconies, or eave overhangs.

•Keep out of the reach of children.

•Be sure screen is in place while in use and do not use in windy conditions.

•Do not overfill firebox or use to burn leaves and trash.

•Exercise the same care you would with an open fire.

•Never leave unit unattended when hot or in use.

•Completely extinguish fire before leaving.

•Use gloves when handling or moving. Ashes can remain warm for a long time after extinguishing.

•Dispose of cold ashes properly.

•Do not modify in any way nor use with parts not expressly approved by Coleman.

•Combustion by-products produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Contact local authorities regarding possible burn restrictions before using product.

Fireplace Parts Check List

		• Check package for all parts needed for assembly.
■	1.	Firebox	■	6.	Leg Brackets
■	2.	Screen Assembly	■	7.	Hardware
■	3.	Leg Support Ring	■	8.	Screen Lifting Tool

■4. Firebox Support Ring

■5. Grate

1 4

3

27

8

5

6

•Check all items for shipping damage. Call Coleman at 1-800-835-3278 or TDD: 316-832-8707 if you have any problems.

Assembly

1. Carefully unpack all parts from shipping box.

2. Align holes in Leg Bracket and assemble to Leg Support Ring as shown. Attach with small bolts and nuts. Hand tighten.

Leg

Bracket

Leg Support

Ring

Assembly (cont.)

3. Place Firebox Support Ring on top of Leg Brackets as shown. Carefully align holes as shown.

Firebox Support Ring	Align
	holes

Leg Bracket

4. Insert long bolts and secure with nuts. Tighten all bolts in Leg Support Ring and Firebox Support Ring.

Tighten all

bolts

(continued on other side)