To Turn On cont.
■Verify ignition by observing gauge:
Start Up |
| |
|
| Unit operating properly when |
|
| needle in green zone |
|
|
|
CAUTION
If the needle enters the red zone (HOT) on the gauge, immediately turn off the unit
&call Coleman at
To Turn Off
■Turn cylinder valve OFF. ■ Allow to cool for approximately 45 minutes before replacing lure or adhesive trap.
Approximate
Consumable Usage
• Propane: 40 days.
• Octenol Lure Refill: 1 month.
• Adhesive Trap: Approximately 2 weeks or when full.
To Move Unit
■Unit can be moved from location to location by using the handle on the unit as shown.
■Repeat this process each time you restart of the unit.
Proper Inhibitor and Trap Placement
1.Placement of the trap – find an area of your yard that is shaded, cool, or well protected by brush. Refer to the Quick Tips Sheet.
2.Mosquitoes breed in standing water or areas that become flooded with water during rain storms. Mosquitoes will also take cover under low lying brush to stay cool on warm days.
3.The trap should be placed in an area away from where people gather. We recommend a distance of at least 50 feet away from people.
4.Positioning of the device is very important. If you are not
catching mosquitoes, move the unit to another area of the yard that is protected from wind and direct sun and is near water. Try each location for a minimum of 2 days.
5.The Trap is designed to operate around the clock in your yard. The Trap continuously attracts, traps, and kills mos- quitoes all day and all night.
6.Together, the Mosquito DeletoTM Inhibitor and Trap are a strong defense against mosquitoes!
7.Place the inhibitor unit per instructions in the inhibitor package.
8
