Coleman 9160N101 Attach Tent to Frame Using Frame Clips, Made In China, Attach Rainfly

Models: 9160N101

1 2
Download 2 pages 9.33 Kb
Page 2
Image 2
3 Attach Tent to Frame Using Frame Clips

3 Attach Tent to Frame Using Frame Clips

–Attach frame clips along

the edges of tent to frame poles. (illus. 5), (illus. 6)

–Make any adjustments to the tent corner stakes that are needed.

illus. 5

Frame clips

illus. 6

Assembled tent without rainfly.

Attach Rainfly

4 –Assemble rainfly pole by interlocking shock-corded pole.

–Insert rainfly pole into reinforced pockets located at the center edges of the underside of rainfly.

(illus. 7), (illus. 8)

–Attach underside of rainfly to the rainfly pole. (illus. 8)

–Drape rainfly over tent frame, pole side down. Rainfly pole should point out over door and rear window.

–Connect the four elastic loops with “S” hooks, (found at the rainfly corners) to the four rings located at the end of the stake loops at the corners of the tent.

–Secure rainfly with attachments located on underside of fly. (illus. 9)

–Stake out the tent with (2) side guylines. (illus. 9)

Rainfly pocket

Pole attachments Attach Rainfly

illus. 7 Insert rainfly pole piece into pocket on underside of rainfly

illus. 8

MADE IN CHINA Rainfly pockets

Underside of rainfly attaches to frame poles

“S” hooks attach to

Side

rings at the corners

guyline

illus. 9 Completed tent with rainfly.

Things You Should Know

Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be mini- mized by removing wet clothing from your tent and by providing good ventila- tion through the tent.

Never store tent, even for a short period of time, without drying it thorough- ly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use a separate storage bag.

STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO REMOVE STAKE.

TENT POLES SHOULD NOT BE LEFT TELESCOPED

TOGETHER DURING STORAGE.

Seam sealer has not been provided with your tent. We recommend seam sealing your tent prior to camping. Seam sealer may be purchased through your local retailer or at your local sporting goods store.

Do not leave your tent set-up for weeks at a time, be aware that exposure to the ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored.

See owners manual for more tips.

WARNING: KEEP ALL FLAME AND HEAT SOURCES

AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CPAI-84.The fabric will burn if left in continuous contact with any flame source.The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

PRINTED IN CHINA REV. 7/03

MADE IN CHINA

Page 2
Image 2
Coleman 9160N101 owner manual Attach Tent to Frame Using Frame Clips, Made In China, Attach Rainfly