Coleman 9232C379 manual Screened Weathermaster, Assemble & Place Roof Poles

When You Are Ready To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, position the end of tent into the wind.

SCREENED WEATHERMASTER™ 17'X9'

Instructions apply to Part Number 9232C379

POLE ASSEMBLY PARTS

(3) Center Curved Roof Poles

(Red Sticker) Part No. 9232C372

(1) Rear (Blue Sticker)

Part No. 9232C373

(2) Rear Brace Poles

(Blue Sticker) Part No. 9232C375

(6) Center Upright Poles

(Red Sticker) Part No. 9232C374

Rainfly Part No. 9232C371

1	Layout & Positioning of Tent
	– Layout and position tent with screen room
	facing desired direction. (illus. 1)
	– Stake down tent, starting with	Roof sleeve

the corners. Do not stretch too tight. Angle the stakes

slightly toward the tent. (illus. 2) Keep the floor taut.

– Stake down the remainder of the stake loops.

– Unzip the door.

illus. 1

illus. 2

Stake loops properly staked

Front of screen door

2 Assemble & Place Roof Poles

– Assemble all shock-corded roof poles. When assembled will form a continuous arch with both ends pointing down. (illus. 3)

–Select center roof poles with red stickers, then insert through the two center roof sleeves and the roof pole sleeve at the front of the screen room. (illus. 4)

–Select end roof pole, with blue

sticker, then insert through the roof sleeve at end of the tent. (illus. 4)

Forms an arch

Shock-corded poles

illus. 3 Curved roof pole assembly.

Roof pole sleeve

illus. 4 Curved roof pole system shown

inserted through pole sleeve.