Coleman 9277H107 manual Crestline 9’10x7’, Connect Frame to Tent

CRESTLINE™ 9’10”x7’

Instructions apply to Part Number 9277H107

When You Are Ready

To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, position the end of tent into the wind.

(2)Main Tent Poles (Black)

(2)Side Poles (Grey)

(2)Rainfly Poles

POLE ASSEMBLY PARTS

Part No. 9277H1021

Part No. 9277H1031

Part No. 9277H1041

Rainfly Part No.

9277H1051

1 Layout & Positioning of Tent, Pole Assembly

–Layout and position tent with door facing desired direction. (illus. 1)

–Unzip door.

–Stake down tent corners only, using the stake loops. Keep the floor taut. (Intermediate loops will be staked later.)

–Assemble frame poles by interlocking shock-corded poles. (four poles)

–Insert the poles into pole sleeves.The longer black poles should cross forming an “X” in the middle of tent. The shorter side grey poles insert into sleeves running front to back. (illus. 1)

illus. 1

Assembled

poles

inserted

through

pole

sleeves

Side poles

(Grey)

illus. 2

Tent stake through ring on stake loop

2 Connect Frame to Tent

– Insert one pin into the end of main tent pole at tent corner. (illus. 3, illus. 4)

– Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole end.

– Repeat for second pole.

– Insert pin into the end of side pole, go to opposite end of pole and apply pressure until you arch the pole and can insert the pin into the pole. (illus. 3, illus. 4)

– Repeat for other side pole.

illus. 4

Tent frame set-up

illus. 3

Insert pin into pole end