SCHEU PRODUCTS COMPANY, INC.
P.O. BOX 5050
UPLAND, CA
MODEL
TYPE OF GAS | Natural Gas | |
INPUTRATING | 100,000 BTU/hr | |
MANIFOLDPRESSURE | 4" Water Column | |
MAX. GAS SUPPLY PRESSURE | .............. 1/2 psi | |
MIN.GASSUPPLYPRESSURE | 5" W.C. | |
PARTSLIST
| Part |
|
|
Item | No. | Description | Qty. |
1 | 0814 | Base Assembly | 1 |
2 | 3095 | Ballast | 1 |
3 | 1074 | Valve Shield Assembly | 1 |
4 | 6113 | Orifice, #55 Drill | 1 |
5 | 1510 | Pilot Assembly | 1 |
6 | 1072 | Manifold Assembly | 1 |
7 | 7616 | Thermoelectric Valve | 1 |
8 | 6067 | Spacer, 5/16" id x 1/2" | 5 |
9 | 1837 | Pilot Tube Assembly | 1 |
10 | 6137 | Fitting, Female Elbow | 1 |
11 | 6234 | Thermocouple, 16" | 1 |
* | 7290 | Manual, Operating Instructions | 1 |
13 | 1594 | Bracket, Pilot Mounting Assembly | 1 |
14 | 3683 | Floor Shield Assembly | 1 |
15 | 1098 | Emitter Grill | 1 |
| Part |
|
|
Item | No. | Description | Qty. |
16 | 3101 | Louvered Emitter | 1 |
17 | 3102 | Pan Hood | 1 |
18 | 6500 | Fitting, 1/2" x Close Nipple | 1 |
19 | 6259 | Regulator, 4" W.C. | 1 |
20 | 6125 | Fitting, Male Connector | 1 |
21 | 7253 | Orifice Pilot | 1 |
22 | 6384 | Label, Natural Gas Only | 1 |
* | 4222 | Bracket, Piezo | 1 |
24 | 7291 | Label, Model/Operating Instructions | 1 |
* | 6473 | Ignitor, Piezo | 1 |
26 | 3106 | Leg Base, Side | 2 |
27 | 3105 | Leg Base, Front | 1 |
* | 6505 | Fitting, Male Connector | 1 |
* | 7161 | Nut, Piezo | 1 |
* | 3451 | Electrode | 1 |
A hazardous condition may result if a heater is used that has been modified or is not functioning properly. When the heater is working properly:
*The flame is contained within the heater.
*The flame is essentially blue with perhaps some yellow tipping.
*There is no strong disagreeable odor, eye burning or other physical discomfort.
*There is no smoke or soot internal or external to the heater.
*There are no unplanned or unexplained shutdowns of
the heater.
The parts list shows the heater as it was constructed. Do not use a heater which is different from that shown.
A heater which is not working right must be repaired, but only by a trained, experienced service person. Contact the factory for the service center closest to you, phone number (909)
You may also obtain
Scheu Products Company
8855 Baker Ave.
Rancho Cucamonga, CA 91730
INSTRUCTIONSFORORDERINGPARTS-
All parts orders must show Heater Model No., Item No., Part No. and Description. We recommend that only parts supplied by the manufacturer be used on this unit. A locally purchased part may appear to be identical, although in reality it might endanger the heater or the persons operating the heater.
The heater should be serviced only by a trained, experienced service person.
Read the section on "Servicing" before ordering parts.
For parts order, call (909)
