3Attach Rainfly
–Layout the Rainfly and locate the logo (illus.6)
–Drape Rainfly over tent frame, the logo should be at the foot of the tent. (illus. 7)
–Connect the clips on the rainfly
(found at the Rainfly corners) to the stake loops at the corners of the tent. (illus. 7 & 8)
–Stake out Rainfly at the front rear and
on each side of the zippered door/vestibule. Pull stake loops out away from tent until Rainfly is taut. (illus.7)
Two Rainfly stake loops on each side
illus. 7 Completed tent with Rainfly. Note
where Rainfly hooks attach and where to stake out rainfly
illus. 8 Rainfly clips to tent stake loop
illus. 6
Rainfly shown with clips
Rolls up and attaches
with toggle & loop for
easy access or added Rainfly stake loop ventilation
Things You Should Know
•Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.
•
•
Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use separate storage bag.
STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO REMOVE STAKE.
•TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER
DURING STORAGE.
3600 N. Hydraulic • Wichita, Kansas 67219
Printed In China Rev. 11/07
© 2000 The Coleman Company, Inc. All Rights Reserved.
