Attaching the Rear Wheels
1.Stand behind the stroller.
2.Locate the small open-
ing on each rear wheel assembly.
3. Locate the small chrome pin on each rear stroller leg.
4. Insert the leg into the wheel assembly until the small chrome pin locks into the opening.
| Attaching the Seat Cushion |
| |
|
| CAUTION | |
1. | Stand behind the stroller and wrap the top of | If seat cushion is ripped or torn, do not use. | |
Do not use the stroller without the seat | |||
| the seat cushion around the stroller frame. | ||
| cushion. | ||
2. | Attach top right and left seat cushion clips to | ||
| |||
| the tabs on the stroller frame. |
| |
3. | Attach bottom right and left seat cushion |
| |
| snaps to the hooks on the stroller frame. |
|
Attaching the Canopy
CAUTION
Failure to fully secure the canopy holders can cause the holders to bend. When storing the stroller by laying it down, be sure the canopy is off the ground to prevent it from bending.
Attaching the Canopy
1.Confirm the canopy is facing in the proper direction.
2.Fully insert the canopy holder (male) to the canopy holder (female) until a click is heard.
3.Fasten the canopy velcro together around the handle (2 places).
Removing the Canopy
Pull the velcro apart, squeeze the bottom of the canopy hold- ers (male) and pull the canopy up from above the canopy holder (female). This must be done on both sides of the canopy to completely remove it.
- 4 -
