Using the Harness | WARNING | Avoid serious injury from falling |
| or sliding out. Always use the | |
|
|
Unbuckling the Harness
1. Press levers down on right and left harness hooks to detach from buckle tongues.
2. Press buckle button down (with Combi logo) and detach buckle tongues from buckle.
Buckling the Harness
1. Place the crotch belt between the baby’s legs. 2. Insert buckle tongues into buckle.
CAUTION
Even when the harness is fastened, be careful not to let the child slip out or stand.
3.Lift buckle with tongues inserted and attach right and left hook to holes in buckle tongue
4.To adjust the harness or waist belt, loosen the slack on both sides of each buckle.
|
| 7. Fold together by |
Folding the Stroller |
| bringing the sides |
|
| of the handle |
|
| together until the |
1. Remove all items from the | 2 | canopies face each |
basket. | other in the | |
2. Lock all front swivel wheels. |
| middle. |
|
| |
3. Make sure seat backs are in |
|
|
the upright position. |
| 3 |
4.Fold both canopies by lifting up on
the canopy levers.
5.Remove your player from the back pocket
of the canopy. | 1 |
6. While lifting |
|
up the folding |
|
levers on both |
|
sides of the | Folding |
handle, tilt the | |
stroller back | Latch |
until it folds |
|
together. | The stroller can be pulled behind |
| |
| you as shown in diagram A or |
| carried over your shoulder as |
| shown in diagram B. |
8.Lock the folding latch to hold the stroller together.
Using the Safety Cover (Boot) | WARNING: Child may slip |
| |
| into leg openings and strangle. |
| Never use in reclined carriage |
| position(s) unless safety cover |
Velcro | (boot) is securely fastened. |
Installing the Safety Cover (Boot)
1. Lift the seat cushion and pull safety cover (boot) out.
CAUTION
Before folding the stroller, unfasten and store the safety cover (boot) under the seat. The stroller will not fold with it attached.
2.Place the safety cover (boot) over the guardrail and secure it with the velcro.
- 5 -
