drive.9.Disconnect the

speaker cables from the system board and remove the speaker assembly from the chassis.

The speaker cables must be properly routed when replacing the speaker assembly.

Place the cables in such a

NOTE: manner that they

cannot be caught or snagged by screws.For more information refer to the section on speakerassembly cable position.To replace the speaker assembly, reverse the previous procedures.

file:///C/SERVICE%20MANUALS/COMPAQ%20_%20che...%201600%20SERIES%201650%20and%201655/511.html (2 of 3)6/27/2004 2:53:13 AM