Compaq Removing Other Components

Removing Other Components

(Authorized Service Providers Only)

Required Equipment

•#0 and #1 Phillips screwdrivers.

•Small flat-blade screwdriver.

Removal Procedure

1.Unplug the AC adapter, if present, and remove the battery.

2.Remove the assemblies and follow the additional steps listed in the table below.

Table 2-5. Removing Components

Component	Removal Procedure	Additional Steps
Battery, CMOS	Keyboard cover	Reassembly Notes: After replacing the CMOS battery,
	(page 2-10).	set the correct time and date using the BIOS Setup
	Speaker (page 2-12).	utility or Date/Time in the Control Panel.
	Switchboard PCA
	(page 2-13).
	Keyboard (page 2-13).
	CD/DVD (page 2-16).
	Display (page 2-17).
	Top case (page 2-20).
	Heatsink (page 2-26).
	Floppy (page 2-22).
	Motherboard (page 2-30).
Case, bottom	See page 2-34.
Case, top	See page 2-20.
CD/DVD drive	See page 2-16.
CPU module	See page 2-28.
Display assembly	See page 2-17.
Doors, PCMCIA	Keyboard cover	See page 2-34.
	(page 2-10).
	Speaker (page 2-12).
	Switchboard PCA
	(page 2-13).
	Keyboard (page 2-13).
	CD/DVD (page 2-16).
	Display (page 2-17).
	Top case (page 2-20).
	Heatsink (page 2-26).
	Floppy (page 2-22).
	Motherboard (page 2-30).
Floppy drive	See page 2-22.

2-38 Removal and Replacement Service Manual