Reference Guide 5–1
5

Add-On Devices

Connecting External Devices

To Insert or Remove a PC Card
The notebook PC Card slot supports standard Type II and
Type III PC Cards (PCMCIA and CardBus).
The location and number of the PC Card slots vary by model
series.
Inserting a PC Card
1. Hold the PC Card label side up and its connectors facing the
card slot.
2. Aligning the PC Card along the bottom of the slot, slide the
PC Card until it is seated. Most cards are properly seated
when the outer edge is flush with the casing of the notebook,
but some cards are designed to protrude from the case.
319954-001.book Page 1 Thursday, February 3, 2005 3:03 PM