6–8 Reference Guide
Troubleshooting

Local Area Network (LAN) Problems

If the Built-In Network Adapter Does Not Connect

to the LAN

Check all cables and connections. Try connecting at a
different network station, if available.
Make sure the LAN cable is Category 3, 4, or 5 for 10Base-T
operation, or Category 5 for 100Base-TX operation.
Maximum cable length is (100 meters) 330 feet.
Select Start > Help and Support > and use the Networking
troubleshooter.
Open the hardware Device Manager:
1. Select Start > Control Panel > Performance and
Maintenance > System.
2. If the network interface is disabled, try to enable it. If it
has a conflict, try disabling another device.

If You Cannot Browse the Network Neighborhood

or My Network Places

Select Start > Search > Notebooks or People to look for a
notebook.

If You Cannot Log In to Netware Servers

If a Netware server is using IPX/SPX protocol, you may need to
force your frame type to match the server frame type. Check with
your network administrator.

If a Network Connection Responds Slowly

If your network connection uses a proxy server, try enabling the
option for bypassing the proxy server for local addresses. You can
do this in Control Panel under your network connection
properties.
319954-001.book Page 8 Thursday, February 3, 2005 3:03 PM