4–6 Hardware and Software Guide
Multimedia
Connecting the Video
To transmit video signals through the S-Video–out jack, you need
a standard S-Video cable, available from most computer or
electronics retailers.
Plug one end of the S-Video cable into the notebook S-Video–out
jack, illustrated below. Plug the other end of the cable into the
S-Video–in jack on the external device.
To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned on.
»To switch the image between the notebook display and the
video device display, repeatedly press the fn+f4 hotkey.
Pressing the fn+f4 hotkey switches the image among the
notebook display, any connected displays, and simultaneous
display.
For more information about fn+f4 and other hotkeys, refer to the
“Hotkeys” section in Chapter 2, “Keyboard and Touchpad.”