![Manual background](/images/new-backgrounds/120247/12024741x1.webp)
3Replace the four drive cage screws.
4Reconnect the power cable and data cable to the optical drive.
NOTE: The location of the cable connections may vary with the optical drive model in your computer.
5Insert the tabs at the rear of the optical drive and cage assembly into the slots at the rear of the computer. Then lower the front of the drive and cage assembly onto the computer.
6Replace the two optical drive cage screws.
7Stand the computer upright.
8Insert the tabs on the right side of the bezel into the slots on the right side of the front of the computer.
17 |