Compaq 610 LED Activity LED Off Radio OFF Solid LED On Radio on, Intel PRO/Wireless Wireless LAN

QuickSpecs

Compaq 610 Notebook PC

Technical Specifications

Microsoft Windows Vista

Microsoft Windows Vista Wireless Network Connection Manager.

Intel IHV extensions for Windows Vista available to support Cisco

Compatible Extensions.

LED Activity LED Off – Radio OFF; Solid LED On – Radio ON

1.Check latest software/driver release for updates on supported security features.

2.Maximum output power may vary by country according to local regulations.

3.In Power Save Polling mode and on battery power.

4.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation).

5.WLAN supplier's client utility is required for Cisco Compatible Extensions support with Microsoft Windows XP. WLAN may also be compatible with certain third-party software supplicants. WLAN supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows Vista.

Intel PRO/Wireless	Wireless LAN	IEEE 802.11a
3945ABG Network	Standards	IEEE 802.11b
Connection		IEEE 802.11g
	Interoperability	Wi-Fi certified
		Cisco Compatible Extensions Program compliant with Microsoft
		Windows 2000 and XP (details at:
		http://www.hp.com/go/notebooks/WLAN)
	Frequency Band	2.4 GHz
	Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
		802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
	Modulation	Direct Sequence Spread Spectrum
		DBPSK, DQPSK, CCK, OFDM
	Security1	Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated
		AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC,
		PEAP-MSCHAPv2, LEAP, EAP-FAST, EAP-SIM.
		Support for Cisco Security Features (proven compatibility with Cisco
		Aironet infrastructure products through the Cisco Compatible
		Extensions Program Version 4).
	Sub-channels	Multinational support with frequency bands and channels compliant to
		local regulations.
	Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
	Network Architecture	Ad-hoc (Peer to Peer)
	Models	Infrastructure (Access Point Required)
	Roaming	IEEE 802.11 compliant roaming between access points
	Output Power (for	15 dBm
	CKK)2
	Output Power (for	15 dBm
	OFDM; power varies by
	data rate)2
	Power Consumption	Transmit: 1.8 Watts (max)
		Receive: 1.4 Watts (max)
		Idle mode3: 150 mW (nominal)
		Sleep mode: 30 mW (max)
	Power Management	ACPI compliant power management
		802.11 compliant power saving mode
	Receiver Sensitivity4	54 Mbps: -72 dBm, 11 Mbps: -88 dBm , 1 Mbps: -97 dBm

DA - 13304 Worldwide QuickSpecs — Version 5 — 9.15.2009 Page 21