Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: MHz Fibre Channel Host Adapter Installation Guide Comments:
Part Number: 122833-002 File Name: d-ch3 Installing Drivers for Novell NetWare.doc Last Saved On: 12/14/00 2:18 PM

Chapter 3

Installing Drivers for Novell NetWare
This chapter outlines the driver installation steps for Novell NetWare 4.2 and
5.1 operating systems. If you are setting up a new system with Novell
NetWare, use the RA4100 SAN Solution Support Software CD when
installing the Novell NetWare operating system and the device drivers.
NOTE: To install the drivers from the RA4100 SAN Solution Support Software CD, follow
the instructions found inside the CD-ROM sleeve.
NOTE: Compaq SmartStart and Support Software CD with a higher revision number than
the RA4100 SAN Solution Support Software may contain an updated version of RA4100
SAN Solution software. If the SmartStart and Support Software CD is used to install your
operating system software, all required software, including device drivers, will be
automatically installed and configured.
Before installing the drivers, you must:
■ Update your system firmware by running System ROMPaq (see
Chapter 2).
■ Configure the hardware by running the System Configuration Utility.