Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps:

1.Place the monitor in a convenient, well-ventilated location near your computer.

2.Connect the monitor signal cable 3 to the 15-pin connector on the rear panel of the computer and tighten the screws.

✎Be sure the signal cable aligns with the 15-pin connector. Do not force the cable onto the connector or you may damage the signal cable.

3.Connect one end of the monitor power cord 1 to the connector on the back of the monitor and the other end 2 to an electrical outlet that is easily accessible and close to the monitor.

English 1-3