Removing the Monitor Base
Before you can mount the monitor onto a swing arm or other mounting fixture, you must remove the monitor from the base.
CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected.
To remove the monitor from the base, complete the following steps:
1.Lay the front bezel down on a soft area to prevent it from getting scratched, defaced, or broken.
2.Remove the cover plate 1 from the monitor base by placing your fingers in the opening on the bottom of the base and pulling upward, then pulling out to remove the cover.
3.Remove the back panel 1 from the monitor by pushing the bottom tabs upward and pulling out to remove the back panel.
4.Disconnect and remove the signal and power cables from the back of the monitor.
5.Remove the four screws 2 as shown in the following illustration.
TFT8030 User’s Guide | 11 |
