Compaq manual Microtower and Small Form Factor, QuickSpecs, HP Compaq dc5750 Business PC

QuickSpecs

HP Compaq dc5750 Business PC

Standard Features and Configurable Components

Memory	DDR2 SYNCH DRAM NON-ECC MEMORY
	Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied
	sizes. This chart does not represent all possible memory configurations. Memory DIMMS must be
	populated beginning with DIMM slot 4 (Channel B) or DIMM slot 3 (Channel A). Slot 4 must be
	populated before slot 2, and slot 3 must be populated before slot 1.

HP recommends dual-channel configurations for maximum performance.

For best performance, place matching DIMMs in black memory slots 4 and 3 (and in white memory slots 2 and 1 if used). Matching DIMMs have the same size, speed, and number of memory chips. If the slot pairs are not matched, all the memory is still used, but the system will operate in single-channel mode. If speeds are mixed, speed will default to the slowest DIMM.

Microtower and Small Form Factor

Maximum Memory	Supports up to 4 GB of DDR2 Synch DRAM. Not all memory configurations possible are
	represented below.
DIMM Size				Slot
		WHITE				BLACK
	1 (Channel A)		2 (Channel B)		3 (Channel A)		4 (Channel B)
256-MB							256-MB
512-MB							512-MB
512-MB					256-MB		256-MB
(dual-channel)
1-GB							1-GB
1-GB					512-MB		512-MB
(dual-channel)
2-GB	512-MB		512-MB		512-MB		512-MB
(dual-channel)
3-GB	512-MB		512-MB		1-GB		1-GB
(dual-channel)
4-GB maximum	1-GB		1-GB		1-GB		1-GB
(dual-channel)

DA - 12546 Worldwide QuickSpecs — Version 10 — 1.30.2007 Page 7