System Configuration menuNOTE: Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language Change the Computer Setup language.
Boot options ●Set an f9, f10, and f12 delay when starting up.
●Enable/disable CD-ROM boot.
●Enable/disable floppy boot.
●Enable/disable internal network adapter boot.
●Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
●Set the Express Boot Popup delay in seconds.
●Set the boot order.
◦1st boot device: USB CD-ROM
◦2nd boot device: USB floppy
◦3rd boot device: USB SuperDisk
◦4th boot device: Notebook hard drive
◦5th boot device: USB hard disk
◦6th boot device: Network controller
Device Configurations ●Swap the functions of the fn key and left ctrl key.
●Enable/disable USB legacy support. When enabled,
USB legacy support allows the following:
◦Use of a USB keyboard in Computer Setup even
when a your operating system is not running.
◦Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.
●Enable/disable BIOS DMA data transfers.
●Enable/disable fan always on while connected to an AC
outlet.
●Enable/disable data execution prevention.
●Enable/disable LAN power saving mode.
●Enable/disable SATA Native Mode.
●Enable/disable Dual Core CPU.
●Enable/disable HDD translation mode.