8. To replace any of the display assembly internal components, remove the following screw covers
and screws:
(1) Two Mylar screw covers on the display bezel bottom edge
(2) Two Phillips 2.5×3.0 screws
The display screw covers are included in the Display Screw Kit, spare part number 595197-001.
9. Flex the inside edge of the top (1), the left and right sides (2), and the bottom (3) of the display
bezel until the bezel disengages from the display back cover.
10. Remove the display bezel (4). The display bezel is available using spare part numbers
620593-001 (for Presario CQ56 models with webcam and microphone modules), 620592-001
(for Presario CQ 56 models with microphone module only), 620595-001 (for HP G56 models
with webcam and microphone modules), and (620594-001 for HP G56 models with microphone
module only).
Reverse this procedure to install the display bezel.
11. To replace the webcam module (select models only), lift the webcam module as far from the
display enclosure as the webcam module cable allows.
Component replacement procedures 61