Compaq iPAQ - page 52

Desktop Management
Quick Setup & User’s Guide 6-13
1. Insert the posts 1on the Security Bar into the openings 2on the rear of
the side panels.
Installing the iPAQ Desktop Security Bar
✎If the metal extension (provided with the Security Bar) is inserted into the post that goes into the
right rear hole on the personal computer, the MultiBay eject button will be disabled. A drive
installed in the MultiBay cannot be removed until the Security Bar is removed.
The Security Bar may vary slightly from the one shown in the illustration above.
2. Install the tamper-proof Torxscrew 3with the small screwdriver 4to
lock the Security Bar onto the Personal Computer. The Security Bar
features a cable lock provision 5for an optional cable lock. For more
information, refer to “Installing a Compaq Security Lock”on page 14.
Securing the iPAQ to a Fixed Work Surface
Holes in the base of the personal computer allow you to bolt it to a desk or
other fixed surface.
QuickSetup_UsersGuide.book Page13 Wednesday, May30, 2001 9:36AM