Compaq MP4800 manual Connecting the Projector to a Desktop Computer, Using the Projector

Using the Projector

Connecting the Projector to a Desktop Computer

1.Connect one end of the projector signal cable into the side of the projector and the other end to the DVI connector 1A or the VGA connector 1B on the desktop computer and tighten the screws.

✎Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector.

2.Connect one end of the power cord 2 into the side of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.

2–4 Compaq iPAQ Microportable Projector MP4800 User’s Guide