7 
Limited Warranty Period The Limited Warranty Period for an HP Hardware Product is 
a specified, fixed period commencing on the date of 
purchase. The date on your sales receipt is the date of 
purchase unless HP or your reseller informs you otherwise in 
writing. 
Types of Warranty Service To enable HP to provide the best possible support and 
service during the Limited Warranty Period, you may be 
directed by HP to verify configurations, load most recent 
firmware, install software patches, run HP diagnostics tests 
or use HP remote support solutions where applicable. 
HP strongly encourages you to accept the use of, or to 
employ available support technologies provided by HP. 
If you choose not to deploy available remote support 
capabilities, you may incur additional costs due to increased 
support resource requirements. Listed below are the types 
of warranty support service that may be applicable to the 
HP Hardware Product you have purchased. 
On-site Warranty Service
Your HP Limited Warranty service may include on-site labor 
support to repair your hardware. HP provides on-site service 
during standard office hours. Standard office hours are 
typically 08.00 to 17.00, Monday through Friday, but may 
vary with local business practices. If your location is outside 
the customary service zone (typically 50km), response times 
may be longer or there may be additional charges. To 
locate the nearest HP authorized service provider refer to 
the HP website at: http://www.hp.com/support 
HP may, at its sole discretion, determine if on-site warranty 
service is required. For example, in many cases, the defect 
can be fixed by the use of a Customer Self Repair (CSR) 
part that you are required to replace yourself based on 
instructions and documentation provided by HP. You are 
also required to co-operate with HP in attempting to resolve 
the problem over the telephone. This may involve performing 
routine diagnostic procedures, installing software updates or 
patches, removing third-party options and/or substituting 
options. In order to receive onsite support, you must: 
(a) have a representative present when HP provides 
warranty services at your site; (b) notify HP if products are 
being used in an environment which poses a potential 
health or safety hazard to HP employees or subcontractors; 
(c) subject to its reasonable security requirements, provide 
HP with sufficient, free, and safe access to and use of all 
facilities, information and systems determined necessary 
by HP to provide timely support; (d) ensure that all 
manufacturers labels (such as serial numbers) are in place, 
accessible, and legible; (e) maintain an environment 
consistent with product specifications and supported 
configurations. 
If you require an HP representative to handle all component 
replacements, support uplift contracts are available at 
additional cost. 
Carry-in Warranty Service
Under the terms of carry-in service, you will be required to 
deliver your HP Hardware Product to an authorized service 
location for warranty repair. You must prepay any shipping 
charges, taxes, or duties associated with transportation of 
the product to and from the service location. In addition, 
you are responsible for insuring any product shipped or 
returned to an authorized service location and assume risk 
of loss during shipping.