Compaq TFT5015 User’s Guide 9
CAUTION: Ensure that the bottom of the monitor base is
positioned over a table or desktop before removing the base
from the monitor.
5. Remove the monitor base from the monitor.
When the base is removed, four threaded mounting holes are
exposed on the monitor panel to be used for mounting purposes.
These mounting holes are spaced 100 mm apart and are
compliant with the Video Electronics Standards Association
(VESA) standard for mounting flat panels. Mounting requires 4
each, M4 x .7 x 10 to 12 mm long screws. The 10 to 12 mm
length assumes a 2.6 mm thick mounting plate is used. If a
different mounting plate thickness is used, the screw length
should be adjusted accordingly.