Compaq XL280 - page 98

PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1800 SERIES REMOVAL & REPLACEMENT 29
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
Processor
To remove the processor, complete the following steps:
1. Prepare the Notebook for disassembly (pg 10).
2. Remove the Palmrest cover with TouchPad (pg 13).
3. Remove the keyboa rd (pg 16).
4. Remove the heat sink (pg 23).
Note: These Notebooks are equiped with one of two different types of processors. Match
the processor in the unit with the correct procedure before attempting to remove it.
5. If the processor matches the image below, complete step a. However, if the processor
matches the image shown on the next page, skip to step b.
a. Place tip of standard screwdriver in center slot, twist screwdriver toward “Free”
until it snaps 1, and lift processor from the chassis 2.
Continued on the next page.