Chapter 5 Web-based Interface Configuration for Compex SGX3226

5.3Trunk Configuration

Port Trunking is the ability to group together several switch ports to increase the bandwidth between Compex SGX3226 and other switch. This is an inexpensive method to increase throughput between switches (or to servers).

NOTE

To avoid broadcast storms, or looping in your network while configuring trunks, you need to disable/disconnect all the ports that you wish to add/remove from both sides of the trunk. Once you have finished configuring trunking, enable/re- connect the ports.

1.You can choose up to 4 ports for trunking by selecting ‘-’ as ‘T’.

2.Click on the Apply button to update the changes and then the Save button to update the latest configuration.

NOTE

You may set up to 4 trunking ports for the switch.

22