Chapter 7 Advanced Configuration for Compex SGX3226
7.3.1Application on Stack Management
From the figure shown below, SGX3226 Unit #1, #2 and #3 are stacked accordingly. Individual switches are linked to its respective workgroup, such as Workgroup A, B and C. Enabling the stacking function allows the master switch to do the configuration on Unit #2 or Unit #3.
Control Station | Workgroup A |
|
SGX3226 Unit #1(Master)
192.168.100.128
Workgroup B
SGX3226 Unit #2 (Slave)
192.168.100.128
SGX3226 Unit #3 (Slave)
192.168.100.128
Workgroup C
Figure 7.1 Application on Stacking function
In order to control all the slave switches, you need to enable the stacking function for all switches. You may follow the procedures as shown below:
1.Connect a RJ45 MDI straight Ethernet cable from the Control Station to SGX3226 Unit #1. Enter http://192.168.100.128 in the internet browser and select Master option in the Stacking State field. You
49