3.Utility and Driver Installation
1.Power on your PC and your system will detect new hardware automatically. Click Cancel to terminate the driver installation.
2.Insert the Product CD into your computer
3.The system will then run the RaLink2_RT2500 setup.exe automatically. Click Next> to proceed.
4.Follow the instructions stated on the screen. The system will prompt you if you need to select your location country. For example, if you are in Singapore, just select Singapore. Click OK to proceed.
5.Click Finish to complete the utility installation. At the same time, your system has installed the driver to your computer.
However, you will notice that the RALINK Wireless Utility screen appears automatically, together with the RALINK Wireless Network Card Setup. Before you can configure the Utility program, first exit the latter by clicking Finish.
If you wish to exit the utility program, simply go to the taskbar and place your cursor on the icon (as circled in red). Then click on the right button of your mouse to select Exit from the main menu.
To check if the driver has been successfully installed to your system,
6.Proceed to your desktop, right click on My Computer and select Properties.
7.Select Hardware tab and click on Device Manager.
8.Ralink RT2500 Wireless LAN Card will appear in the Network Adapters section. This indicates that the drivers for Compex iWavePort WLP54G has been successfully installed to your system.