Computer Tech Link 910TF manual Setup

PRODUCT FEATURES

•The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color.

•The monitor supports a safe working environment in strict compliance with the MPR II standard for low emissions.

•The monitor complies with the VESA Display Data Channel (DDC) specification for Plug and Play compatibility. Advanced microcircuitry makes setup and configuration fast and effortless.

•The monitor features Advanced Color Controls for fine- tuning to meet your own personal tastes or application requirements. Use the on-screen controls to adjust the color temperature, RGB gain value for the best possible screen color and intensity.

•Press the menu button and activate the Self-Diagnosis menu to determine whether your monitor is functioning normally, not receiving a signal or is receiving a signal that is out of scanning range.

•Activate the higher refresh rates of the monitor to stabilize the screen and eliminate the annoying flicker that contributes to eye-strain and headaches.

•The “borderless” full-screen display capability works under all graphic modes and provides a larger viewing area than conventional monitors, giving you a better picture with more workspace.

•The monitor which has applied the DynaFlat CDT offers creating sharper and cleaner images even at the outer most edges of the screen.

SETUP

CONNECTING THE SIGNAL CABLE AND POWER CORD

1.Turn off the computer and monitor.

2.Connect the 15 pin D-sub connector to the output port of the video card in your computer.

3.Tighten the screws of the connector.

4.Plug the power cord into the AC receptacle located on the back of the monitor.

5.Plug the other end of the power cord into the AC outlet.

Signal Cable

Power Cord

If your power cord is PC-to-Monitor type, plug the other end of the power cord into the AC receptacle in the computer.

English - 2 English - 3