®

KNOW EVERYTHING ABOUT THE INFINITI HAIR DESIGNERBY CONAIR®

ROOTS

1.Select the vertical position for the straightener attachment.

2.Separate a section of hair about 1½" wide. Hold the dryer (detangling comb facing out) under the section of hair and place it at the roots ensuring that the teeth penetrate the hair fully.

3.Gently pull the dryer to about 1" from the roots and turn under: this will

give the action of the Tourmaline Ceramicand fl ocked disks maximum effect.

4.Hold the dryer parallel to your scalp for 5 seconds.

5.Then slide the appliance slowly towards the ends.

6.Repeat if necessary and fi nish with a shot of cool air on the section of hair for perfect hold.

STRAIGHTENING AROUND THE CONTOURS OF THE FACE

Select the diagonal position for the straightener attachment. Then follow instructions under 2, 3, 4, 5 and 6 described above.

®

KNOW EVERYTHINGVERYTHING ABOUTABOUT THETHE INFINITIINFINITI HAIRHAIR DESIGNERDESIGNERBYBY CONAIRCONAIR®

BANGS

Curved bangs

1.Select the vertical position for the straightener attachment.

2.Separate a section of hair about 1½" wide. Place dryer (detangling comb facing out) under the section of hair.

3.With a slight twisting motion of the wrist, turn the appliance upward to lift the roots and slide it slowly over the ends.

4.Hold for 5 to 10 seconds: the Tourmaline Ceramicand fl ocked disks work best this way.

5.Repeat if necessary and fi nish with a shot of cool air on the section of hair for perfect hold.

Page 12
Image 12
Conair 208 manual Roots, Straightening around the Contours of the Face, Bangs