IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety pre- cautions should always be followed, includ- ing the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER Any appliance is electri- cally live even when the switch is off. To reduce the risk of death by electric shock:

1.Always unplug appliance immediately after using.

2.Do not use while bathing or in a shower.

3.Do not place or store appliance where it can fall or be pulled into a tub or sink.

4.Do not place in, or drop into water or other liquid.

5.If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING To reduce the risk of burns, electrocution, fire, or injury to persons:

1.This appliance should never be left unattended when plugged in.

2.This appliance should not be used by, on, or near children or individuals with certain disabilities.

3.Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

4.Do not use an extension cord to operate

appliance.

5.Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examina- tion and repair.

6.Keep the cord away from heated surfaces.

7.Do not pull, twist, or wrap line cord around appliance, even during storage.

8.Never place the appliance on a soft surface, such as a bed or couch, where the air openings may be blocked.

9.Never use while sleeping.

10.Never drop or insert any object into any opening.

11.Do not use outdoors or operate where aero- sol (spray) products are being used or where oxygen is being administered.

12.Do not let heated surfaces touch eyes

or bare skin. This straightener is hot when in use.

13.Do not place the heated straightener directly on any surface or on the appliance power cord while it is hot or plugged in.

14.Before plugging in, read the information about dual voltage contained in the instruc- tion section of this manual.

15.Do not touch the housing of your appli- ance near the straightening plates as it is hot when in use.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This straightening iron appliance is intended for household use. This unit is designed to operate at 120/240 volts AC. Use on Alternating Current (50/60 hertz) only.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

DUAL VOLTAGE

This straightening iron will automatically adjust to the proper voltage. Use an adapter plug with correct configuration, prior to use in outlet.

DRYING, SYSTEM WITH UNIQUE

DRY N STRAIGHTWET DRY DESIGN

This Wet Dry Straightener features our exclu- sive vent and channel design, allowing for use on dry or damp hair. When used on damp hair, excess water is forced into channels where it can escape as steam. The steam evaporates through the vents in the housing, while the hair’s natural moisture is sealed into the cuticle.

CAUTION: Steam evaporating through the vents may be hot. During use, avoid touching or blocking the vents and direct drying vents away from your scalp and face.

STRAIGHTENING BASICS

1.Plug the straightening iron cord into any household outlet (120/240V). Press On but- ton (the red light will blink indicating that the straightener is heating up). The iron will heat up very quickly. The green indicator light will light indicating that the unit is set to “wet” setting and will blink until the unit reaches the proper temperature. To turn off, press Off button (red light will go off). Never leave your straightening iron on and unattended. However, if you fail to turn the unit off, it will shut itself off automatically within 60 minutes.

WARNING: The straightening iron's ceramic-coated plates will get very hot within a few seconds and should not be placed in contact with the skin after the straightening iron has been turned on.

Start with a hair section that is 2" wide and no more than 1/2" thick. Open the iron and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the unit down along the hair section toward the end of hair. At the end of hair section, release the pressure on the handle and allow the hair sec- tion to slide out. Repeat process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeat process on certain areas, depending on the texture of your hair or how damp it is.

Some experience is necessary when learning to use this straightening iron. After using iron several times, you will learn the ideal way to straighten and style your hair easily.

NOTE: Please refer to the temperature setting guide for heat settings, especially if using your iron on damp hair.

STYLING WITH THE NEW EASY-GLIDE

CERAMIC-COATED PLATES

The plates of your new straightening iron have an easy-glide ceramic-coated surface, the newest technology.

This means that hair glides easily over the surface of the plates as you’re straightening and it is simpler to clean off styling product residue after each use. The ceramic-coated surface also helps smooth down flyaways and frizzies. As you smooth each strand, heat is evenly distributed so that the style you create has a salon-perfect, silky smooth, shining finish. Hair slips right off the plates after it’s straightened.

The ceramic technology is a pleasure to work with because it makes styling your hair easier and the results more professional.

USING INSTANT HEAT, THE 25 WETDRY VARIABLE TEMPERATURE SETTINGS & UNIFORM HEAT RECOVERY SYSTEM

This straightening iron features Conair’s Instant Heat technology. It heats up to the temperature you’ve selected for your hair type and is then ready to use.

Within this Instant Heat technology there are 25 variable wetdry temperature settings for every type of hair, from the finest to the curliest and most resistant. Use the low settings for wet/damp hair and as your hair dries turn to the medium settings. Once hair is completely dry, use the medium to high set- tings to complete the straightening process.

Temperature Setting Guide

TEMP. CONTROL

HAIR TYPE

 

 

Low/Wet 1-8

Delicate, thin, easy-to-straighten hair

 

 

Medium/Damp 9-14

Average to thick or treated hair

Med/High 15-20

Thick or wavy hair

High/Dry 21-25

Hard-to-straighten hair

 

 

And that’s not all. Conair’s professional salon standards of engineering provide you with a Uniform Heat Recovery System that maintains the straightening iron at a constant temperature.

There is a constant flow of power to ensure that heat is continuously delivered for optimal styling results, unlike other units which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

Page 1
Image 1
Conair CS44CS important safety instructions Save These Instructions Operating