LOADING THE BATTERIES
The Concord
To load the batteries:
1.Locate the battery door on the bottom of the camera.
2.Slide the button on the battery door toward the center of the camera. (fig.1.1)
3.Lift the battery door to open.
4.Insert the batteries with the positive terminal toward the + sign, and the negative terminal toward the - sign. (fig.1.2)
5.Close the battery door.
fig.1.1 |
fig.1.2 |
TURNING THE CAMERA ON AND OFF
When the camera is turned on, the camera ready LED on the back of the camera blinks and the LCD displays the current settings.
1.Press the Power button.
2.The camera is ready for picture taking when the camera ready LED stops blinking and LCD icons appear on the LCD. (fig.1.3)
3.To turn the camera off, press the Power button.
fig.1.3 |
Note: To change this setting, please refer to the TV Mode section of the User’s Guide for further instruction.
SETTING THE FLASH
1.In the FLASH menu, press 
or 
to choose
between Auto ( A ), Flash ( 
), and Flash
Off ( 
).
2.Press OK to select the flash mode and press MENU to exit.
MENÚ PRINC |
M o d o |
C a l i d a d |
F l a s h |
W B |
FLASH |
A u t o |
F l a s h |
Flash Off |
Main Menu |
Flash Status |
| Distance from subject | |||
|
|
|
|
| |
Auto ( A ) |
|
| 8.5ft (2.5m)and 3.9ft | (1.2m). | |
|
|
|
|
|
|
Flash | ( | ) |
| 8.5ft (2.5m)and 3.9ft | (1.2m). |
|
|
|
|
| |
Flash | Off | ( | ) | 3.9ft (1.2m) to infinity | |
Note: The flash may need time to recharge between photos. While it is charging the camera ready LED blinks. When it stops blinking you are ready to take another picture. If the batteries are low, the flash will not work. Insert fresh batteries.
2
