Blue Heat/PCI User’s Manual, Connect Tech Inc.
Revision 0.11 6
Blue Heat/PCI
Blue Heat/PCI RS-422/485
Blue Heat/PCI RJ-11
Blue Heat/PCI Opto; Opto RS-422/485
Blue Heat/PCI CL
Universal Blue Heat/PCI RS-422/485
Connect Tech Inc. declares that the product(s) covered by the contents of this manual have been
tested and found compliant with the below listed standards as required by the Electromagnetic
Compatibility (EMC) Directive for General Immunity Compliance, EN 50 0082.1:1997
EN 55022 Conducted and Radiated emissions
CISPR 22 Class A
EN 55024 Immunity to Disturbances
EN 61000-4-2 EN 61000-4-4
EN 61000-4-3 EN 61000-4-6
The above satisfy the requirements of:
USA: FCC – CFR47, Part 15, part 2
Canada: ICES-003
Europe: EMC Directive
Japan: VCCI
Australia/New Zealand: AS/NZS
The above agency conformances were met by independent laboratory testing of Connect Tech
Inc. product(s) with shielded cables, with metal hoods, attached to either the terminating
connectors or cable assemblies supplied with the product(s). Failure to follow good EMC/EMI
compliant cabling practices may produce more emissions or less immunity than were obtained in
laboratory measurements.
Operation of this equipment in a residential area may cause unacceptable interference to radio
and TV reception, requiring the user to take whatever steps necessary to correct the interference.
Industry Industrie
Canada Canada