Ver.1.01
BX-710-AC, BX710P2-AC, BX710P4-AC 1
Fanless, Ultra Low Voltage Celeron M 1.06GHz
BOX-PC 710 series
* Specifications, color and design of the products are subject to
change without notice.
Model Expansion Slot OS
(storage device)
BX-710-AC5000 －
BX-710P2-AC5000 PCI slot x 2
BX-710P4-AC5000 PCI/ISA slot x 4
－
This product is an industrial personal computer (box computer®)
that has a Ultra Low Voltage version of Celeron M Processor
1.06GHz that enables completely natural-air-cooling (fanless)
operation.
The BX-710 series has a Ultra Low Voltage version of Celeron M
Processor, a 945GME chipset, and 1GB of DDR2 SDRAM.
The BX-710P2 series has a Ultra Low Voltage version of Celeron
M Processor, a 945GME chipset, and 1GB of DDR2 SDRAM as
well as two slots of PCI buses.
The BX-710P4 series has a Ultra Low Voltage version of Celeron
M Processor, a 945GME chipset, and 1GB of DDR2 SDRAM as
well as four slots of PCI buses.
Various interfaces such as dual LAN / USB2.0 / CF card slot /
RS-232C and the slot-in 2.5 inches SATA hard disk bay unit being
installed, this product is widely usable as a platform based on the
OS for the general-purpose PC.
Embedded-type CPU and chip set have been adopted. The use
of readily available parts ensures the ease of the use of the
product. In addition, the use of CONTEC-customized BIOS
allows support to be provided at the BIOS level.
Adoption of ultra-low voltage Celeron M Processor 1.06GHz,
945GME chip set, and 1GB of memory
A power-thrifty Ultra Low Voltage version Celeron M Processor
1.06GHz/FSB533MHz, an Intel® 945GME chipset, and 1GB of
memory as standard specifications. The adoption of an
embedded-type CPU and chipset enables a stable power supply.
Adoption of slot-in 2.5 inches SATA hard disk bay unit
Slot-in method is adopted allowing easy install / removal.
Fan-less operation achieved by natural air-cooling
The use of a power-saving CPU and naturally-cooled cabinet
structure allows fanless operation.
Dual LAN, USB2.0 x 6, CF card slots x 2, etc. located at the
front for easier maintenance
Extended interfaces such as 1000BASE-T x 2, USB2.0 x 6, serial
(RS-232C) x 2 are all placed at the front, providing excellent
maintenance advantages. In addition to a general-purpose
analog RGB interface, the product has an LVDS interface, which
enables dual screen display. Plus, it has two CF card slots
(Type I, bootable) that are very useful in enabling separate
handling of OS and data, allowing an operation style in which
maintenance data, system log, and/or collected data can be
taken out for further work at other locations.
Expansion slots to hold PCI bus boards (Model with
Expansion Slot).
BX-710P2-AC5 has two PCI slots.
BX-710P4-AC5 has four PCI slots.
Board size that can be attached is 240(L) x 107(H)[mm].
Safety design with an anti-disconnection mechanism and
BIOS setting retention function
Unnecessary trouble can be avoided by the use of clamps for
prevention of cable disconnection and the use of metal fittings for
prevention of CF card disconnection. Retention of CMOS data
by EEPROM allows the system to start up even when the battery
has run out. In addition, the use of a CONTEC-customized
BIOS (mfd. by Award) allows support to be provided at the BIOS
level.
Structure free from mechanical moving parts (Windows
Embedded Standard-installed model)
The use of a CF card or a SSD for the storage device has
eliminated any moving parts, improving the levels of the
environment resistance (ambient temperature, impact, vibration),
reliability and quietness. It is possible to use the EWF function
of OS. It is designed for safety required for embedding purpose,
for example, prohibiting unwanted writing to the CF card or the
SSD with EWF function will relieve the concern about the writing
limits to the CF card or the SSD and prevent an unintentional
system alteration.
* EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that
protects the disk from being actually written by redirecting the writing to RAM.
Installation-compatible with conventional products in the
IPC-BX 900/701/700/630/620/600 series
For the installation-compatible with conventional products in the
IPC-BX 900/701/700/630/620/600 series, it is easy to migrate
from the existing system.
Windows XP Professional
Windows Embedded Standard 2009