FIRST USE
Before the first use, please check if all the parts of the appliance are in good condition. If not, please contact the supplier or manufacturer.
USING
1.Pour the required quantity of cold tap water into the jar. Do not exceed the maximum level (refer to the markings on the inside of the jar).Do not use wine, or any other flammable liquid.
2.Place the lid on the jar. Ensure that the lid is locked with the jar handle. Thereby blocking the holes in the lid with the button provided.
3.Plug the blender in.
4.Push the speed knob to whatever mixing speed you need, or push the button to pause and hold to keep mixing on. Caution: mixing at most every 60 seconds must stop and wait 60seconds before resetting.
5.Once mixing is complete, unplug the blender. Remove the jar carefully.
CLEANING
1.Remove the plug from the wall socket before cleaning.
2.To clean the jar and lid, use hot soapy water and soft cloth. Do not use abrasive products. not
3.To clean the base, remove any liquid still in the reservoir by tipping up the base over a sink. Clean the inside with a damp cloth and allow to dry. This process can be repeated for the outside of the base.
4.Clean the appliance with a damp cloth and never put it into water or flush it with water.
CAUTION
1.The plug must be removed before cleaning the blender and it must be dried before the blender is used again.
2.Do not use the blender if the lead is damaged.
3.If the power cable on the blender is damaged, it may only be replaced by a repair center recognized by the manufacturer, since special tools are required.
4.The blender must not be immersed in eater for cleaning purposes.
5.Do not use the blender for purposes other than that for which it is intended.
6.To ensure continued protection against risk of electric shock, connect to properly grounded outlets only.
