Cooper Bussmann EDSC2199 With Cutler-HammerSwitches, Heater Table Cutler-Hammer, Raintight

2C EDS Series Factory Sealed

Manual Motor Starting

Switches and Enclosures

Cl. I, Div. 1 & 2, Groups B*, C, D	Explosionproof
Cl. II, Div. 1, Groups E, F, G	Dust-Ignitionproof
Cl. II, Div. 2, Groups F, G	Raintight
Cl. III	Wet Locations
NEMA 3, 7B*CD, 9EFG

With Cutler-Hammer Switches

Maximum HP Ratings
	120–240	32		120	240
Poles	Volts AC	Volts DC		Volts DC	Volts DC		Cat. #
1	1 hp	1/4	hp	1/4 hp	1/4	hp	WEST MST01
2	1 hp	1/4	hp	1 hp	3/4	hp	WEST MST02

2C

Poles Hub Size in.		Dead end Cat. # Through feed Cat. #
Single Gang		EDS21101 ➀	EDSC21101 ➀
1	3/4
	1	EDS31101 ➀	EDSC31101 ➀
2	3/4	EDS21102 ➀	EDSC21102 ➀
	1	EDS31102 ➀	EDSC31102 ➀
Two Gang		EDS22101 ➀	EDSC22101 ➀
1	3/4
	1	EDS32101 ➀	EDSC32101 ➀
2	3/4	EDS22102 ➀	EDSC22102 ➀
	1	EDS32102 ➀	EDSC32102 ➀

Heater Table (Cutler-Hammer)

Max. Motor		Max. Motor
Full-Load	Crouse-Hinds	Full-Load	Crouse-Hinds
Amps	Symbol Number	Amps	Symbol Number
.43	W 1	2.95	W21
.48	W 2	3.27	W22
.53	W 3	3.59	W23
.58	W 4	3.99	W24
.64	W 5	4.39	W25
.71	W 6	4.79	W26
.78	W 7	5.26	W27
.87	W 8	5.83	W28
.95	W 9	6.39	W29
1.03	W10	7.03	W30
1.15	W11	7.74	W31
1.27	W12	8.46	W32
1.35	W13	9.35	W33
1.51	W14	10.30	W34
1.67	W15	11.35	W35
1.83	W16	12.47	W36
1.99	W17	13.67	W37
2.23	W18	15.12	W38
2.47	W19	16.00	W39

2.71W20

➀Includes one interchangeable heater. Select heater from the table below individual listings and use symbol number as second section of the Cat. No. Example: EDS2199-P5. Insert symbol 0 (zero) to omit heater.

These heaters are for motors rated 40°C continuously. For motors rated 50°C or 55°C, multiply full load motor current by 0.9 and use this value to select heaters. Symbol 0 (zero) must be used to indicate heater omitted.

*Add GB suffix. Seals must be installed within 11/2" of each conduit opening for Group B usage.

464 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2010 Cooper Crouse-Hinds