Cooper Lighting 6000 Engineered for the Elements, Venterra, HIGH PERFORMANCEe n g i n e e r i n g

Engineered for the Elements.

The Monaco defies earth, water, and traffic.

The Monaco 6000 family is both engineered to last and capable of withstanding the most extreme outdoor environments. The innovative Venterra™ heat and water management system is just one example of the intense engineering that went into the fixture’s resilient design. The corrosion resistant, in-ground housing is made from injection molded polycarbonate, and is drive-over rated up to 5000 lbs.

HIGH PERFORMANCE e n g i n e e r i n g

Venterra™

Innovative Heat and Moisture Management.

The key component of the Venterra™ system is the inner lamp module, which is IP68 rated. IP68 refers to an IEC standard that rates the protection an enclosure provides against particles and liquids. The IP68 rating is the highest rating possible and ensures that the enclosure is not only dust tight but can also withstand continuous submersion.

TRIM ASSEMBLY

Rugged solid brass or stainless steel exterior trim for the ultimate in corrosion resistance.

LIGHT CONTROL MEDIA

Innovative accessory holder accommodates up to three accessories. Choose from an array of dichroic filters, a hex cell louver, an internal linear spread lens, or the Temperature Reduction Lens (TRL).

LAMP MODULE

The lamp module is the heart of the Monaco, offering an IP68 ingress protection rating. The tilt angle and rotation may be controlled by the innovative Beam Driver™ biaxial aiming system, integral to the Monaco’s lamp module.

HOUSING

Rugged and corrosion resistant injection molded polycarbonate housing offers long term, outdoor durability, and provides a 5000 pound drive-over rating, when ordered with the optional drive-over structural bracket kit (-DSB).

Solid Metal Trim

1/2” Thick Tempered Glass Lens

Hex Cell Louver

TRL Lens*

Dichroic Filter

Accessory Holder

IP68 Seal

Reflector Housing

Main Housing

THERMAL MANAGEMENT

MOISTURE MANAGEMENT

110º C
100º C
90º C
80º C
70º C
60º C
50º C
40º C
30º C
20º C
10º C
0º C	MH70T4
MH39T4

MH39T6	MH70T6	MH50	MH70	MH100MH39PAR20	MH70PAR38
				MH39PAR30LMH70PAR30L		MH100PAR38

* Temperature Reduction Lens (TRL)

Hottest spot on outer lens without temperature reduction lens (TRL) option

Hottest spot on outer lens with temperature reduction lens (TRL) option

r

)FBU
NBOBHFNFOU
TZTUFN
BMMPXT
MVNJ- naire to “breathe” to avoid overheating r

5FNQFSBUVSF
3FEVDUJPO
-FOT
53-
SFáFDUT
heat and parts of the infrared spectrum back into the fixture, reducing top lens

temperature

r

1PUFOUJBM
GPS
VQ
UP
UISFF
MFOTFT
CFUXFFO
the source and the exposed surface

r

'MPXUISPVHI
TZTUFN
BMMPXT
moisture to easily exit the fixture

r
8BUFSQSPPG
DBCMFT r
(BTLFUFE
UPQ
USJN r

(BTLFUFE
BOE
NFDIBOJDBMMZ

sealed inner lamp module

4

5