Cooper Lighting ADY080864 dimensions Roundel, XL INDOOR, Visor and Non-Visor, Mounting bracket

Warning: Before starting any work ensure that all sources of power are turned off. All work must meet local/national codes and be performed by a certified electrician. Do not mount fixtures vertically.

Installation Instructions

Sheet 1 of 3

Roundel, XL

INDOOR

PS (Pendant Swivel)

Visor and Non-Visor

Exploded View and Part Call-Out

J-box

(by others)

Canopy

	Pendant length dependant
Mounting bracket	on order(multiple sections
	may be required, consult
	factory for coupler and
	safety wire installation
	requirements).

1/4-20 x1" Aiming screw

End cap Fixture door

#8-32 x.75" Cap screw (x2)

3/8-16 x1" Hex end screw (x2)

Attention:

All extra large fixtures require additional bracing/structure around J-box to support fixture.

1.Securing Power side Pendant to Ceiling

J-box

(by others)

Mounting plate

Appropriate fasteners (by others)

(x2)

Canopy

1.Remove canopy and allow it slide down pendant.

2.Using appropriate fasteners(by others), secure mounting plate to structure/ bracing around J-box.

3.For mounting plate dimensions refer to page three(3).

2.Securing non-Power side Pendant

Appropriate fasteners (by others)

(x2)

Mounting plate

Canopy

1.To mount non-power side pendant, use dimensions provided on page three(3).

2.Using appropriate fasteners(by others), secure mounting plate to structure/ bracing in ceiling.

ADY080864 REV B(ECN080377)