Cooper Lighting Bollard Series manual Louvered SERIES-DESIGN Features, Top

LOUVERED SERIES—DESIGN FEATURES

TOP

Rugged, minimum 5/32" thick cast aluminum top cap secured via a concealed stainless steel allen screw with twist removal mechanism for lamp access. Flow through ventilation assures cool to the touch top.

LOUVERS

Cast Aluminum Louver blades provide sharp cutoff providing no direct light above 90°. Louvers are secured to the shaft via tamper resistant stainless steel rods and fasteners.

LAMP ENCLOSURE

Lamp enclosure is one-piece tempered glass with internal flutes for even disbursement of illumination. Decorative colored glass optional. Globe is fully gasketed via EPDM material. Socket is porcelain, medium-base for HID lamp sources.

LOWER HOUSING

Nominal 1/8" thick extruded aluminum housing. Bollard housing is secured to the base with flathead, counter-sunk screws for smooth, uncluttered appearance.

ELECTRICAL

High Power Factor ballast for –20°F starting. Product is factory mounted to the base. Quick disconnects provided between lamp and electrical assembly. Metal Halide and High Pressure Sodium lamp sources up to 100W Metal Halide or High Pressure Sodium coated lamps.

FINISH

Premium fade and abrasion resistant, TGIC Polyester Powder Coat Finish. Standard colors are Bronze, Architectural White, Grey and Black. Other architectural finish colors available including all RAL matches.

BASE

Rugged cast aluminum. Completely concealed.

MOUNTING

Base mounts onto foundation with three (3) 1/2" x 12" anchor bolts on a 5" Dia. bolt circle (a centrally located 2 7/8" x 3 1/2" wire entrance opening provided).