Cooper Lighting HMS24CR specifications 250W - 400W, 165W, Applications, A ... Lens, C ... Housing

DESCRIPTION

The Fail-Safe HMS24CR series combines maximum corrosion resistance and energy-saving technology for your toughest industrial environment. The surface-mounted luminaire utilizes a stainless-steel continuously welded one-piece housing, minimizing the number of components exposed to the harsh environment. The HMS24CR is ready for the toughest environments. Ceiling mount, U.L.-listed and C.S.A.-certified for wet location.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

FAIL-SAFE®

TypeDate

Applications

The HMS24CR series is an excellent choice for all corrosion- prone industrial environments. Consideration should be given to any atmosphere consisting of acids, alkalis, salts, gases or water. Critical locations are where con- densation, vaporization, heating and cooling may occur. Applica- tions include high ceilings where H.I.D. lamp sources are the most cost-effective manner to illuminate the area.

A ... Lens

Choice of prismatic polycarbonate or prismatic tempered glass. Consult ordering information.

B ... Fasteners

Four stainless-steel fasteners. Phillips head is standard. Also available with tamper-resistant screws.

C ... Housing

Die-formed 20-ga. stainless-steel body with continuously welded and ground ends to form a one-piece seamless housing for maximum resistance to the environment. Standard 304 stainless-steel, cold-rolled and annealed, with a natural brushed finish.

D ... Lamps

(By Others)

ED

E ... Hinge

Stainless-steel internal hinge allows for easy maintenance and reduces the number of parts exposed to the environment.

F ... Door Frame

Die-formed 20-ga. stainless-steel, cold-rolled and annealed with overlapping corners.

G ... Ballast

Copper wound, HPF ballast is standard.

Labels

U.L.-listed, C.S.A.-certified, standard wet label.

A H C I

HMS24CR

250W - 400W

High Pressure Sodium Metal Halide

165W

QL Induction

STAINLESS-STEEL SURFACE LUMINAIRE

13"

[330mm]

B		20"	F
G		[508mm]
		24"
MOUNTING DIMENSIONS		[610mm]
(4) 3/8" [10mm]	(2) 7/8" [22mm]	2 1/4" [57mm]
Dia. Mtg. Holes	Dia. KO
		Dia. Access Hole

9 7/16"

[240mm]9" [229mm]

18 7/8"	18"
	[457mm]
[480mm]

24"

[610mm]

E N E R G Y D A TA

Input Watts:

(1)250W High Pressure Sodium: 300W

(1)250W Metal Halide: 295W

(1)400W High Pressure Sodium: 465W

(1)400W Metal Halide: 455W

24"	TORX® is a registered trademark
[610mm]
	of Camcar Division of Textron Inc.

Specifications and Dimensions subject to change without notice.	ADC041723
Consult your representative for additional options and finishes.	04/10/2007 9:17:31 AM