TM
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
Mast Arm Adapter
Sheet 3 of 5
5/26/04 IMI-606
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
4.Attach Housing to Mast Arm Adapter -
Remove the WIREWAY PLUG from the | Fig. 4a | |
HOUSING. Move the fixture leads aside so |
| |
the THREADED RODS may be accessed |
| |
through the fixture HOUSING. |
| |
See Figure 4a. |
| |
Attach the MAST ARM ADAPTER to the |
| |
HOUSING by inserting the threaded studs |
| |
into the fixture HOUSING. Feed the fixture |
| |
wires through the MAST ARM ADAPTER. |
| |
Slide the HOUSING over the threaded | Wireway Plug | |
rods and secure it with the PLAIN | ||
| ||
WASHERS, LOCK WASHERS, and HEX |
| |
NUTS. See Figure 4b. |
| |
Torque HEX NUTS as follows: |
| |
Medium Icon (ICM) - 450 |
| |
Small Icon (ICS) - 130 |
|
WARNING
Risk of Personal Injury
Fixture may become damaged and/or unstable if not installed properly
Tighten all fixture components to their recommended torque values
NOTE: It may be helpful to use a deep socket when installing the HEX NUTS.
Re-install the WIREWAY PLUG into the wireway in the HOUSING.
Fig. 4b
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
