Cooper Lighting J/E-PSW-FX-02 installation instructions Large, OUTDOOR P2R, Visor and Non-Visor

Installation Instructions

Sheet 1 of 3

Vault

C-Scroll

Roundel

Large, OUTDOOR

P2R

(Pendant, 2-way, Remote ballast)

Visor and Non-Visor

Warning: Before starting any work ensure that all sources of power are turned off. All work must meet local/national codes and be performed by a certified electrician. Do not

These installation instructions are valid with the above Ametrix styles.

mount fixtures vertically.

	Exploded view and part call-out
Canopy	#8-32 x3/8"
	Set screw
	(2x)

1Securing pendant to ceiling

3/8" fasteners	J-box
(by others)	(by others)

1/4-20 x4"
Hex bolt	Cover plate
(2x)	(2x)

#8-32 x3/8" Set screw (2x)

Cover plate

Canopy

1/4-20 x4 Hex bolts (2x)

Fixture head assembly

Attention:

Large fixtures require additional bracing/structure

around J-box to support fixture.

2Wiring the fixture

1/4-20 x4
Hex bolts	Cover plate
(2x)

1.Slide fixture assembly onto pendant and secure with both 1/4-20 x4 hex bolts.

2.Attach appropriate wires and ensure all connections are properly matched

3.Secure cover plate

1.Remove both 1/4-20 x4 hex bolts from bottom of pendant.

2.Remove both #8-32 x3/8" set screws and allow canopy to slide down pendant.

3.Run wires from J-box into pendant, ensure there is enough wire to reach cover plate.

4.Using appropriate fasteners, secure fixture to ceiling. Use additional bracing if necessary.

5. Replace canopy and secure using both set screws.

3Sealing the fixture

#8-32 x1/2" Socket cap screws (2x)

Cover plate

gasket (2x)

#8-32 x5/8" Socket cap screws (3x)

Wire seal

1.To seal fixture, ensure door is secured with provided socket cap screws. Secure #6-32 x1/2" socket cap screws above door latches.

2.Secure #6-32 x5/8" socket cap screws into bottom of door.

3.Refer to supplementary sheets for torque specs and aiming instructions.

ADY071474 REV A(ECN070347)